Page Fault In Nonpaged Area: Failed to restart with an error and stop code on the computer crashed page? This error usually occurs when an application or process tries to use memory that belongs to a workgroup but is not available in shared memory.

Errors on this page can be caused by Windows 11 hardware or software issues. Outdated device drivers, corrupted system files, memory module failures,and faulty hardware can cause this error. If your computer frequently crashes with Page_Fault_in_Nonpaged_Area stop code, here are the possible reasons behind it and solutions to fix blue screen error in Windows 11 or Windows 10.

Page Fault In Nonpaged Area

Let’s first understand page faults in page faults. When a program or operating system accesses memory, it uses two types of memory pages: paged and pageless. Paper memory can be temporarily stored on a hard disk when not in use, but unbacked memory is always stored in the computer’s memory.

Free space is an area of memory that holds system data and hard drives that cannot be connected to a hard drive. When a program or the operating system tries to access a page in a site intentionally, the system throws a “page fault” in Windows 10 or 11.

Cause of page fault in non-page region?

A faulty RAM module or faulty hard drive can cause memory-related errors, including page faults. Incorrect virtual memory settings, outdated device drivers, or corrupted or damaged system files can also cause memory availability.

• Incompatible or outdated device drivers can affect memory availability and cause errors.
• If the hard drive files are corrupted, it can mess up the memory and cause errors.
• Low or insufficient memory can cause memory inconsistencies and errors.
• Some software programs or drivers may conflict with each other, causing memory leaks.
• Hardware components such as an unstable hard drive or problematic peripherals can cause failure.
• Use the Windows diagnostic tool to check hardware for memory errors, system file corruption, or troubleshooting. Page Fault In Nonpaged Area

Start Windows in Safe Mode

When you see the blue screen error in Windows 11, you need to disconnect external devices and restart your computer. If Windows 11 restarts due to this blue screen error, restart your PC in the usual safe mode and follow the solutions listed below.

Start Windows 11 from the Start menu by pressing the Shift key -> power options.
When the computer restarts, click Troubleshooting and then go to the previous options
Click on the Start Settings, then restart. Now press F4 to enter safe mode and system F5.
To get rid of this blue screen error when booting Windows 11 in safe mode, use the fixes listed below.

Disable automatic file size page

Virtual memory, also called the “paging file,” is part of your computer’s hard drive that is allocated as an extension of the physical RAM. If the virtual memory settings are configured incorrectly, such as setting the page file size too low or too large, it can cause memory-related issues such as “Unallocated local page error”.

• Press Windows key + R, type SystemPropertiesAdvanced.exe and click OK to open the system properties, make sure you are in the Advanced tab.
• In the Productivity section, click Settings.
• In the Productivity Options window, go to the advanced tab. In the Virtual Memory section, click Change.
• First, check the “Automatically control page file size for all drivers” option.
• After that, make sure that the “Stop by network” option is selected. Then click OK to save the changes.

Check the device problem

Faulty systems, such as incorrect RAM or incorrect hard drive, can cause memory-related errors. To check the hardware problem.

Run the Diady Diagnostic Tool to check for RAM errors

• Press the Windows key + R, type “mdsched.exe” and press Enter to open the Windows Diagnostic Tool.
• Select “Restart Now and Check for Problems” to start testing.
• This tool will debug your computer’s RAM as a whole. It can take a few minutes.
• Once the scan is complete, your computer will automatically restart. Check that the error persists.
• Check the hard disk for errors with the chkdsk utility

Press Windows key + S and type cmd, right click on command prompt and select as administrator,
In the command prompt window, type chkdsk C: /f/r and press Enter.

Tip: CHKDSK is short for Disk Monitoring, C: is the letter of the drive you want to monitor, /F means correct disk errors, and /R means restore data from bad sectors. Page Fault In Nonpaged Area

You can schedule a disk check for the next job restart. Type Y and press Enter.
Restart your computer and the disk will start checking for errors and try to fix them if possible.
Completing the scan, as it may take some time, when the Scan is finished, your computer will automatically restart. Check that the error persists

Read:

Know How To Program GE Universal Remote